Engineered for high-pressure hydraulic systems, this 0.282" polycarbonate sheet offers exceptional impact strength and clarity. Its robust nature ensures reliability in demanding environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.282" |
| Length | 18" |
| Width | 18" |
Specified by design engineers worldwide, this 0.282" thick polycarbonate stock sheet is a critical component in fluid power applications. Measuring 18" in length and 18" in width, it provides a substantial surface area for custom fabrication. Polycarbonate's inherent toughness and excellent optical clarity make it ideal for sight glasses, protective covers, and manifold blocks within hydraulic circuits, resisting moderate chemical exposure and extreme temperature fluctuations. Its high tensile strength ensures structural integrity under significant pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly before application. 2. Ensure proper alignment with mating components. 3. Secure using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper cooling, leading to melting and poor edge quality. | Utilize high-speed steel or carbide-tipped cutting tools with adequate lubrication and cooling to maintain a clean cut. |
| Exposing polycarbonate to aggressive solvents or cleaning agents that can cause crazing or degradation. | Employ only mild detergents and water for cleaning. Consult material compatibility charts for specific chemical resistance data. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic sight glasses, Protective shields for hydraulic machinery, Manifold blocks in low-to-medium pressure systems, Fluid level indicators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||