This high-quality carbon steel stock sheet is engineered for superior performance in critical pressure and temperature control systems. Its robust construction ensures reliability and longevity in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.280" |
| Length | 15" |
| Width | 32" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a thickness of 0.280 inches, a length of 15 inches, and a width of 32 inches. The material's inherent strength and thermal conductivity make it ideal for applications requiring robust structural integrity and efficient heat transfer in pressure and temperature regulation systems. Its composition provides excellent weldability and machinability for custom fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity prior to fabrication. 2. Ensure proper surface preparation for welding or joining. 3. Install according to system design specifications and applicable codes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect sheet thickness for the intended pressure rating. | Always consult engineering drawings and pressure vessel codes to select the appropriate sheet thickness. |
| Inadequate surface preparation leading to weld defects. | Thoroughly clean and degrease the weld joint area to remove rust, scale, and contaminants. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure vessel fabrication, Heat exchanger components, Temperature control manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||