This carbon steel stock sheet is engineered for demanding hydraulic systems. Its robust 0.268" thickness and substantial 16"x41" dimensions provide superior strength and reliability for critical structural and component applications.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.268" |
| Length | 16" |
| Width | 41" |
Purpose-built for heavy-duty applications, this carbon steel stock sheet offers exceptional tensile strength and rigidity, essential for robust hydraulic manifold construction, structural supports within fluid power systems, and custom component fabrication. Measuring 0.268 inches thick, 16 inches in length, and 41 inches in width, this material exhibits excellent machinability and weldability, allowing for precise integration into complex hydraulic assemblies. Its inherent durability ensures resistance to high pressures and operational stresses, making it the material of choice for applications requiring long-term performance and structural integrity under challenging conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity before cutting or machining. 2. Prepare surfaces for welding or fastening according to industry standards. 3. Install sheet as a structural component or fabricated part within the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to material deformation. | Employ high-quality cutting tools specifically designed for carbon steel to ensure clean, precise cuts without compromising material integrity. |
| Inadequate surface preparation for welding, resulting in weak joints. | Thoroughly clean and degrease all welding surfaces, removing any mill scale, rust, or contaminants to achieve optimal weld penetration and strength. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Structural Support Plates, Custom Hydraulic Component Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||