This high-performance 0.257-inch thick Nylon stock sheet is engineered for robust applications in heating and cooling systems. Its substantial dimensions (45" x 14") provide ample material for custom fabrication and component creation.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.257" |
| Length | 45" |
| Width | 14" |
A high-performance industrial component, this Nylon stock sheet offers superior mechanical strength and abrasion resistance, critical for demanding HVAC environments. Its 0.257" thickness provides structural integrity for load-bearing applications, while the 45" x 14" dimensions allow for efficient utilization in custom fabrication. Nylon's inherent thermal stability and low coefficient of friction make it ideal for components exposed to moderate temperature fluctuations and moving parts within heating and cooling ductwork, fan housings, and impeller blades.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Smooth all cut edges to eliminate burrs and ensure a clean finish. 3. Secure the fabricated Nylon component to its intended mounting surface using recommended fasteners, ensuring proper alignment and torque.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to material stress and potential cracking. | Employ high-speed steel or carbide-tipped cutting tools specifically designed for plastic materials, ensuring proper feed rates and cooling. |
| Over-tightening fasteners, which can cause stress concentration and deformation of the Nylon sheet. | Utilize calibrated torque wrenches and washers to distribute load evenly and prevent over-compression of the Nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Ductwork fabrication, Fan shroud construction, Impeller component manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||