This 0.250" thick Aluminum 6061 stock sheet, measuring 37" x 32", is a prime material for demanding pressure and temperature control systems. Its robust mechanical properties ensure system integrity and longevity.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.250" |
| Length | 37" |
| Width | 32" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet boasts a substantial 0.250" thickness, a generous 37" length, and a 32" width, providing ample material for fabricating critical components. Aluminum 6061 is a precipitation-hardened alloy offering an excellent balance of strength, corrosion resistance, and weldability, making it ideal for environments where thermal cycling and pressure fluctuations are common. Its moderate cost and widespread availability further enhance its utility in diverse industrial settings, from heat exchangers to pressure vessels and control manifolds.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish meet project specifications. 2. Prepare edges for joining or assembly, ensuring cleanliness and absence of contaminants. 3. Fabricate and integrate into the pressure/temperature control system following established engineering drawings and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized material for critical load-bearing components. | Always confirm the required material thickness and grade based on calculated stress loads and operating conditions as per design specifications. |
| Improper surface preparation before welding or bonding, leading to weak joints. | Thoroughly clean all mating surfaces with appropriate solvents to remove oils, oxides, and other contaminants before any joining process. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, Pressure Vessel Components, Control Manifold Construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||