This robust carbon steel stock sheet is engineered for demanding plumbing and janitorial applications. Its substantial thickness and durable material provide exceptional strength and longevity for custom fabrication and repairs.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.239" |
| Length | 20" |
| Width | 15" |
Built to exacting engineering tolerances, this carbon steel stock sheet measures 0.239 inches in thickness, with a precise length of 20 inches and a width of 15 inches. The material's inherent tensile strength and formability make it ideal for fabricating custom brackets, reinforcement plates, and structural components within plumbing and janitorial systems. Its carbon content ensures excellent weldability and rigidity, crucial for applications requiring sustained structural integrity under load. This sheet is designed to withstand corrosive environments common in janitorial settings and the pressure demands of plumbing infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the steel sheet by cleaning all surfaces to remove any oil, grease, or debris. Ensure the cutting area is well-ventilated. 2. Accurately measure and mark the sheet according to your project's design specifications. Utilize appropriate cutting tools (e.g., abrasive cut-off wheel, plasma cutter, or shear) to achieve clean, precise cuts. 3. Smooth any sharp edges or burrs using a file or grinding wheel. If welding or fastening, prepare the edges according to industry best practices for carbon steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incorrect fasteners for the sheet's thickness, leading to inadequate structural support. | Always select fasteners (bolts, screws, rivets) with appropriate thread engagement and shear strength to match the 0.239" thickness and the anticipated load. |
| Failing to address potential corrosion on cut edges after fabrication, leading to premature material degradation. | Apply a suitable protective coating (e.g., primer, paint, galvanizing spray) to all cut edges and exposed surfaces to prevent rust and corrosion, especially in humid or chemical-rich environments. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom bracket fabrication for pipe support systems, Reinforcement plates for high-traffic janitorial areas, DIY project fabrication requiring strong, durable metal components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||