This high-quality carbon steel stock sheet, measuring 0.238" x 13" x 37", is engineered for demanding pressure and temperature control applications. Its robust construction ensures reliability and longevity in harsh environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.238" |
| Length | 13" |
| Width | 37" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a substantial 0.238" thickness, providing exceptional structural integrity. With dimensions of 13" in length and 37" in width, it offers ample material for fabrication. Composed of carbon steel, it exhibits excellent tensile strength and a high yield point, making it suitable for applications involving moderate to high pressures and temperatures. Its machinability and weldability facilitate easy integration into various engineered systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris. 2. Precisely cut to the required dimensions for the application. 3. Securely fasten or weld into position according to engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a thinner gauge steel than specified for the pressure/temperature requirements. | Always verify the material thickness against the design pressure and temperature ratings of the system. Consult engineering specifications. |
| Inadequate surface preparation before welding or joining. | Thoroughly clean the edges and mating surfaces of the carbon steel sheet to remove any oil, grease, or rust to ensure strong, defect-free welds. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||