This high-quality brass stock sheet is engineered for robust pulling and lifting applications. Its durable brass construction ensures excellent corrosion resistance and non-sparking properties, making it ideal for challenging environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.231" |
| Length | 13" |
| Width | 13" |
Built to exacting engineering tolerances, this brass stock sheet provides a reliable foundation for critical pulling and lifting systems. Measuring 0.231 inches in thickness with a 13-inch by 13-inch dimension, it is fabricated from high-grade brass known for its excellent tensile strength, malleability, and inherent non-sparking characteristics, crucial for hazardous environments. The material's resistance to corrosion and environmental degradation ensures longevity and consistent performance under sustained load conditions, making it a preferred choice for industrial-grade rigging and material handling components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely align the brass stock sheet with the intended mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even torque distribution to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that can corrode and weaken the assembly. | Utilize stainless steel or brass fasteners specifically chosen for their corrosion resistance and compatibility with the brass sheet. |
| Over-tightening fasteners, leading to stress concentrations and potential material fatigue. | Employ a torque wrench set to the manufacturer's recommended specifications to ensure uniform and controlled fastening. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated pulley blocks, Reinforcement plates for rigging hardware, Non-sparking structural components in hazardous areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||