This high-quality carbon steel stock sheet, measuring 0.229" thick by 29" in length and 26" in width, is engineered for robust performance in hydraulic applications. Its superior strength and durability ensure reliable operation under demanding conditions.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.229" |
| Length | 29" |
| Width | 26" |
Manufactured under strict quality controls, this carbon steel stock sheet exhibits excellent tensile strength and yield strength, crucial for withstanding high pressures common in hydraulic systems. The 0.229" thickness provides substantial structural integrity for fabricating components such as hydraulic manifolds, pump housings, and cylinder end caps. Its precise dimensions of 29" x 26" ensure consistent material availability for efficient machining and assembly, minimizing waste and enhancing production throughput in hydraulic equipment manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or dimensional inaccuracies before cutting. 2. Utilize appropriate cutting tools (e.g., waterjet, plasma, or laser cutting) to achieve desired component shapes. 3. Deburr all cut edges thoroughly to prevent stress risers and improve sealing surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Insufficient edge preparation after cutting. | Thoroughly deburr all cut edges using appropriate tools to ensure smooth surfaces and prevent premature wear or leakage in hydraulic components. |
| Using the wrong cutting method, leading to excessive heat input and material distortion. | Employ cutting methods like waterjet or laser cutting which minimize heat-affected zones, preserving the material's integrity and dimensional accuracy. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Pump and Motor Housings, Cylinder End Caps and Glands.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||