Engineered for demanding hydraulic systems, this 0.223" thick carbon steel stock sheet provides exceptional structural integrity and pressure containment. Its robust material composition guarantees reliable performance in high-stress environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.223" |
| Length | 43" |
| Width | 23" |
Specified by design engineers worldwide, this 0.223" thick carbon steel stock sheet, measuring 43 inches in length and 23 inches in width, is manufactured to exacting standards for hydraulic applications. Its high tensile strength and yield point ensure superior performance under extreme pressure and dynamic loads. The material's inherent toughness and resistance to fatigue make it ideal for fabricating robust hydraulic cylinders, manifolds, and structural components that require reliable and long-lasting service life in rigorous industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is free from surface contaminants and damage. 2. Accurately cut and shape the sheet according to hydraulic system design blueprints. 3. Perform necessary welding or fastening operations with appropriate procedures to maintain material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the sheet in corrosive environments without appropriate surface treatment. | Apply a protective coating or use a corrosion-resistant alloy if the operating environment is aggressive. |
| Improper welding techniques leading to heat-affected zone degradation. | Follow AWS D1.1 or equivalent welding codes with preheating and post-weld heat treatment as specified for thick carbon steel. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Cylinder Barrels, Hydraulic Manifold Blocks, High-Pressure Fluid Reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||