This 0.220-inch thick nylon stock sheet offers exceptional mechanical strength and thermal stability. Ideal for demanding pressure and temperature control applications requiring a robust and reliable material solution.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.220" |
| Length | 45" |
| Width | 39" |
Manufactured under strict quality controls, this 0.220" thick Nylon stock sheet, measuring 45" in length and 39" in width, provides superior abrasion resistance, high tensile strength, and excellent impact toughness. Its inherent thermal stability makes it suitable for environments with moderate temperature fluctuations, while its low coefficient of friction facilitates smooth operation in dynamic systems. This material is engineered for consistent performance and dimensional integrity under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut material to the intended application using appropriate mechanical fasteners or adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to chipping or uneven edges. | Utilize carbide-tipped blades or abrasive cutting wheels specifically designed for plastic or nylon to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause stress concentrations and material deformation. | Employ washers to distribute load and tighten fasteners incrementally to the manufacturer's recommended torque specifications for nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guides in high-pressure systems, Thermal insulation barriers, Gaskets and seals in temperature-controlled environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||