This premium brass stock sheet, precisely manufactured to 0.219" thickness, 19" length, and 30" width, offers exceptional thermal conductivity and corrosion resistance, making it ideal for demanding HVAC applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.219" |
| Length | 19" |
| Width | 30" |
Manufactured under strict quality controls, this brass stock sheet boasts a substantial 0.219" thickness, ensuring structural integrity and efficient heat transfer in critical heating and cooling systems. The alloy composition provides excellent corrosion resistance, crucial for longevity in environments exposed to moisture and varying temperatures. Its dimensions of 19" x 30" offer ample surface area for fabrication into heat exchangers, piping components, and manifold systems within HVAC infrastructure. The inherent malleability of brass allows for ease of forming and shaping to meet precise engineering requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the brass sheet thoroughly to remove any surface contaminants. 2. Precisely cut the sheet to the required dimensions for its intended application. 3. Fabricate and install according to system design specifications, ensuring proper sealing and support.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning leading to poor solder adhesion. | Always degrease and abrade the brass surface before any joining process. |
| Overheating during fabrication, causing material degradation. | Utilize appropriate heat control methods and tooling to maintain material integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchanger Fabrication, HVAC Piping Components, Manifold Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||