This 0.218" thick carbon steel stock sheet is engineered for the rigorous demands of hydraulic systems. Its robust construction ensures superior performance and longevity in critical fluid power applications.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.218" |
| Length | 25" |
| Width | 20" |
Purpose-built for heavy-duty applications, this 0.218" carbon steel stock sheet offers exceptional tensile strength and a high yield point, crucial for withstanding the extreme pressures and cyclical loads inherent in hydraulic systems. Its precise dimensions of 25" in length and 20" in width facilitate efficient fabrication of hydraulic manifold blocks, pump housings, and reservoir components. The material's inherent machinability allows for intricate porting and sealing surfaces, while its resistance to deformation ensures structural integrity under sustained operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area for installation is clean, dry, and free from contaminants. 2. Precisely cut the stock sheet to the required dimensions for the specific hydraulic component. 3. Fabricate and machine the sheet according to hydraulic design specifications, paying close attention to porting and sealing surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel not rated for hydraulic pressure. | Always verify material specifications to ensure it meets the tensile and yield strength requirements for your specific hydraulic application. |
| Inadequate surface preparation before machining. | Thoroughly clean the stock sheet to remove any mill scale, oil, or debris that could interfere with machining accuracy or component sealing. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Hydraulic Pump Housings, Hydraulic Reservoir Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||