Engineered for robust performance, this 0.216" thick carbon steel stock sheet offers superior strength and durability for critical hydraulic system components. Its precise dimensions ensure reliable integration.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.216" |
| Length | 17" |
| Width | 16" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a nominal thickness of 0.216 inches, a length of 17 inches, and a width of 16 inches. The inherent strength and ductility of carbon steel make it an ideal material for fabricating components subjected to high pressures and stresses within hydraulic systems, such as manifold blocks, mounting plates, and structural supports. Its reliable tensile strength and machinability ensure precise component creation for optimal hydraulic fluid containment and power transmission.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any debris or contaminants. 2. Position the carbon steel sheet precisely according to the hydraulic system design specifications. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting) ensuring a tight and leak-free seal as per engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or leaks. | Always degrease and thoroughly clean all surfaces that will come into contact during assembly. |
| Over-tightening fasteners, causing deformation of the steel sheet or compromised sealing. | Follow specified torque values during fastening to prevent material distortion and ensure a reliable seal. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Mounting Plates for Hydraulic Components, Structural Reinforcement in Hydraulic Assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||