This 0.214" thick carbon steel stock sheet, measuring 20"x26", is engineered for robust performance in hydraulic systems. Its inherent strength and formability make it ideal for fabricating critical hydraulic components requiring reliable structural integrity.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.214" |
| Length | 20" |
| Width | 26" |
Trusted by engineers across multiple sectors, this 0.214" thick carbon steel stock sheet offers exceptional tensile strength and yield point, crucial for withstanding high pressures inherent in hydraulic operations. The precise 20"x26" dimensions ensure consistent material utilization and reduce waste in fabrication processes. Its carbon content provides excellent weldability and machinability, allowing for complex component manufacturing. This material is selected for its durability and resistance to deformation under load, making it a preferred choice for manifolds, valve bodies, and structural elements within hydraulic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the carbon steel sheet to the required dimensions for the hydraulic component. 2. Fabricate the component using appropriate welding, machining, or forming techniques. 3. Perform rigorous dimensional and structural integrity checks before integration into the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade steel for high-pressure hydraulic applications. | Always specify and use carbon steel sheets with sufficient thickness and material grade to meet or exceed the design pressure requirements of the hydraulic system. |
| Inadequate surface preparation before welding or coating. | Thoroughly clean the steel surface to remove all contaminants, including oil, grease, and mill scale, prior to any welding, painting, or sealing operations to ensure proper adhesion and prevent weld defects. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Hydraulic Valve Bodies, Hydraulic Cylinder End Caps, Pump Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||