This durable 0.204" thick Nylon stock sheet, measuring 24"x37", is engineered for demanding industrial hardware applications requiring superior strength, low friction, and excellent wear resistance.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.204" |
| Length | 24" |
| Width | 37" |
Engineered for reliability and performance, this Nylon stock sheet boasts a precise thickness of 0.204 inches, a standard length of 24 inches, and a width of 37 inches. Manufactured from high-grade Nylon, it exhibits exceptional tensile strength, good impact resistance, and a low coefficient of friction, making it ideal for components subjected to repeated stress and movement. Its inherent chemical resistance and dielectric properties further enhance its suitability for a wide range of operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Prepare mounting surfaces for secure attachment, ensuring they are clean and free of debris. 3. Fasten the cut Nylon component using suitable hardware, ensuring proper torque to avoid material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ carbide-tipped blades or laser cutting for clean, precise cuts on Nylon. |
| Over-tightening fasteners, which can cause stress concentration and cracking in the Nylon. | Utilize washers and torque wrenches set to appropriate specifications to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Gears and Sprockets, Insulators and Dielectric Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||