This high-strength carbon steel stock sheet, precisely manufactured to 0.204" thickness, 21" length, and 22" width, is engineered for robust hydraulic system components. Its material integrity ensures reliable performance under pressure.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.204" |
| Length | 21" |
| Width | 22" |
Built to exacting engineering tolerances, this 0.204" thick carbon steel stock sheet measures 21" in length and 22" in width. Composed of a high-carbon alloy, it exhibits superior tensile strength and yield strength, making it ideal for fabricating hydraulic manifolds, pump housings, and valve bodies. The material's inherent toughness and resistance to wear ensure longevity and operational integrity in high-pressure hydraulic environments, meeting stringent industry standards for structural integrity and material composition.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Clean the carbon steel surface thoroughly to remove any contaminants or protective coatings. 3. Proceed with fabrication (e.g., cutting, bending, welding) according to approved engineering drawings and process parameters.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel not rated for hydraulic pressures. | Always specify and verify the use of high-carbon steel meeting relevant hydraulic system material standards. |
| Inadequate surface preparation before fabrication, leading to weld defects or corrosion. | Ensure the carbon steel surface is meticulously cleaned and free from oil, grease, rust, and mill scale prior to any machining or welding. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Hydraulic Pump and Motor Housings, Hydraulic Valve Bodies and Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||