This high-performance 0.199-inch thick Nylon stock sheet provides robust solutions for pressure and temperature control applications. Its superior material properties ensure reliability in challenging industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.199" |
| Length | 29" |
| Width | 24" |
A proven choice for industrial professionals, this 0.199" thick Nylon stock sheet, measuring 29" in length and 24" in width, offers exceptional mechanical strength, abrasion resistance, and a wide operating temperature range. Its inherent toughness and low coefficient of friction make it ideal for components subjected to continuous wear and thermal cycling in pressure and temperature control systems. This material exhibits excellent resistance to chemicals and moisture, ensuring long-term performance and dimensional stability under demanding conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the Nylon component to its intended application, adhering to specified torque or pressure requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools, leading to delamination or rough edges. | Utilize sharp, carbide-tipped blades designed for plastics to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause stress cracking or deformation of the Nylon. | Employ calibrated torque wrenches and consult material specifications for recommended fastener torque values. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Seals and Gaskets in Pressure Vessels, Wear Strips and Bushings in Temperature Regulators, Insulating Components in High-Temperature Fluid Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||