Engineered for robust hydraulic systems, this 0.197-inch thick polycarbonate sheet offers superior impact strength and clarity. Ideal for critical fluid containment and protection where durability is paramount.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.197" |
| Length | 33" |
| Width | 21" |
Built to exacting engineering tolerances, this 0.197" thick polycarbonate stock sheet measures 33" in length and 21" in width. Its inherent high impact resistance, exceeding that of glass and acrylic, makes it ideal for hydraulic fluid reservoirs, sight glasses, and protective shielding in high-pressure environments. The material's excellent clarity ensures visibility of fluid levels and system integrity. It exhibits good chemical resistance to many hydraulic fluids, though specific fluid compatibility should always be verified. Its light weight and ease of fabrication further enhance its utility in hydraulic component design and manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove debris and contaminants. 2. Ensure proper gasket material is selected and applied according to hydraulic system specifications. 3. Secure the polycarbonate sheet using appropriate fasteners, applying even torque to avoid stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing localized stress and potential cracking. | Use a calibrated torque wrench and follow specified tightening patterns to distribute load evenly. |
| Using abrasive cleaners or solvents that can degrade or scratch the polycarbonate surface. | Employ mild soap and water or specialized polycarbonate cleaners, followed by a soft cloth rinse and drying. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic Reservoir Sight Glasses, Protective Shields for Hydraulic Components, Fluid Containment and Transfer Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||