This high-performance Nylon stock sheet is precisely manufactured for critical pressure and temperature control applications. Its robust material properties ensure reliable operation in demanding industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.193" |
| Length | 40" |
| Width | 38" |
Built to exacting engineering tolerances, this 0.193" thick Nylon stock sheet measures 40" in length and 38" in width. Nylon, known for its excellent tensile strength, wear resistance, and low coefficient of friction, makes this material ideal for seals, gaskets, and wear components in systems requiring stable pressure and temperature regulation. Its inherent chemical resistance further enhances its suitability for diverse industrial fluid handling and control applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area for installation is clean and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Secure the cut component using suitable fasteners or adhesives, ensuring a tight seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during cutting, leading to delamination or chipping. | Utilize sharp cutting tools specifically designed for plastics and maintain a consistent, controlled cutting speed. |
| Improper sealing leading to leaks under pressure or temperature fluctuations. | Verify that the installed component forms a complete and uniform seal with mating surfaces, considering gasket compression requirements. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Sealing components in hydraulic and pneumatic systems, Gaskets for high-pressure fluid containment, Wear pads and guides in temperature-sensitive machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||