Engineered for critical heating and cooling systems, this 0.191" thick 304 stainless steel stock sheet offers robust corrosion resistance and exceptional thermal performance, ensuring reliability in demanding environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.191" |
| Length | 41" |
| Width | 45" |
Specified by design engineers worldwide, this 0.191" thick 304 stainless steel stock sheet conforms to ASTM A240 standards, providing superior mechanical strength and excellent weldability for fabricating heat exchangers, ductwork, and containment vessels. Its inherent resistance to oxidation and pitting at elevated temperatures makes it ideal for applications involving corrosive media and extreme thermal cycling, ensuring long-term operational integrity and minimal maintenance requirements in HVAC, industrial process heating, and thermal management solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from contaminants. 2. Accurately cut the sheet to the required dimensions using appropriate cutting tools (e.g., plasma cutter, waterjet). 3. Secure the sheet using approved welding procedures or mechanical fasteners, ensuring proper joint preparation and filler material selection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners in stainless steel assemblies. | Always utilize 304 or 316 stainless steel fasteners to prevent galvanic corrosion and ensure long-term joint integrity. |
| Inadequate surface preparation prior to welding. | Thoroughly degrease and remove any scale or oxide layers from the weld zone using stainless steel brushes to ensure a clean and sound weld. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Industrial Oven Linings, HVAC Ductwork Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||