High-strength Aluminum 6061 stock sheet, precisely fabricated for demanding pressure and temperature control systems. Offers excellent machinability and corrosion resistance.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.186" |
| Length | 45" |
| Width | 20" |
Built to exacting engineering tolerances, this 0.186" thick Aluminum 6061 stock sheet measures 45" in length and 20" in width. Aluminum 6061 is a precipitation-hardened alloy renowned for its moderate to high strength, excellent corrosion resistance, and good weldability. Its balanced properties make it suitable for a wide range of structural components, particularly in environments where thermal management and pressure containment are critical. This alloy's versatility allows for easy fabrication and machining into complex geometries for various industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation environment is clean and free of debris. 2. Verify sheet dimensions and material integrity prior to cutting or shaping. 3. Follow standard fabrication procedures for Aluminum 6061, including appropriate joining and finishing techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and dimensional inaccuracies. | Employ sharp, high-quality cutting tools specifically designed for aluminum, and maintain proper feed rates and speeds. |
| Inadequate surface preparation before welding or bonding, compromising joint strength. | Thoroughly clean the mating surfaces with a degreaser and wire brush to remove oxides and contaminants. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat exchangers, Pressure vessel components, Temperature control manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||