Engineered for hydraulic systems, this high-grade brass stock sheet provides exceptional corrosion resistance and formability. Its precise dimensions ensure optimal performance in demanding fluid power applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.180" |
| Length | 29" |
| Width | 36" |
Manufactured under strict quality controls, this brass stock sheet offers superior performance in hydraulic environments. Measuring 0.180 inches thick, 29 inches in length, and 36 inches in width, it is fabricated from high-purity brass known for its excellent machinability and resistance to a wide range of hydraulic fluids and environmental factors. This material's inherent properties make it ideal for fabricating critical hydraulic components such as manifolds, fittings, and valve bodies where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is clean and free of any contaminants. 2. Precisely cut the sheet to the required dimensions for the intended hydraulic component. 3. Machine or form the component according to design specifications, ensuring tight tolerances for sealing surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or deformation. | Utilize sharp, high-quality cutting tools specifically designed for brass to ensure clean cuts and precise dimensions. |
| Inadequate cleaning of the material before machining, causing tool wear and poor surface finish. | Thoroughly clean the brass stock sheet with an appropriate solvent to remove any oils, dirt, or debris prior to any machining operations. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Fabrication, Hydraulic Fitting Manufacturing, Custom Hydraulic Valve Bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||