This high-quality carbon steel stock sheet, measuring 0.178 inches thick, 35 inches long, and 24 inches wide, offers superior strength and durability for demanding plumbing and janitorial tasks.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.178" |
| Length | 35" |
| Width | 24" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a nominal thickness of 0.178 inches (approximately 4.5 mm) and a precise yield strength suitable for structural integrity in plumbing and janitorial systems. Its carbon content ensures excellent weldability and formability, allowing for custom fabrication of brackets, supports, and containment units. The material's inherent rigidity and resistance to deformation make it ideal for applications requiring sustained load-bearing capacity and protection against moderate impacts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate metalworking tools. 2. Prepare edges for joining or mounting as per application specifications. 3. Securely fasten sheet to substrate or integrate into system using approved methods (welding, bolting, etc.).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for sheet metal, leading to jagged edges and potential material stress. | Employ specialized sheet metal shears, plasma cutters, or abrasive saws for clean, precise cuts. |
| Improper surface preparation prior to welding or coating, resulting in poor adhesion and potential corrosion. | Thoroughly degrease and remove any mill scale or rust from the surface using wire brushes or chemical treatments before proceeding. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom bracket fabrication for pipe support systems, Shielding and protection panels in janitorial areas, Fabrication of drain trays and containment units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||