This robust carbon steel stock sheet provides a foundational material for constructing custom hydraulic components. Its precise dimensions and material strength ensure reliability and longevity in demanding fluid power systems.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.176" |
| Length | 46" |
| Width | 31" |
A high-performance industrial component, this 0.176" thick carbon steel stock sheet is engineered for critical hydraulic applications. Measuring 46" in length and 31" in width, it offers substantial material for fabrication. The inherent strength and durability of carbon steel, particularly at this gauge, make it ideal for components subjected to high pressures and cyclic stress within hydraulic circuits. Its machinability and weldability allow for precise shaping and integration into complex hydraulic assemblies, ensuring efficient and dependable fluid power transfer. This sheet meets stringent industrial standards for material consistency and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity prior to cutting. 2. Precisely cut the stock sheet to required component dimensions using appropriate metalworking equipment. 3. Prepare cut edges for subsequent fabrication steps, such as welding or machining, ensuring adherence to design tolerances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly cut sheets, leading to structural compromise in hydraulic components. | Always double-check measurements and utilize calibrated cutting tools to ensure exact adherence to design specifications. |
| Inadequate surface preparation before welding, resulting in weak or porous weld joints. | Thoroughly clean and degrease the mating surfaces to remove any contaminants that could impair weld quality. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic manifold blocks, Custom hydraulic cylinder components, Reservoir fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||