This 0.174" thick carbon steel stock sheet, measuring 15" x 17", is engineered for demanding hydraulic system components. Its robust material properties ensure reliability and longevity in high-pressure environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.174" |
| Length | 15" |
| Width | 17" |
Trusted by engineers across multiple sectors, this carbon steel stock sheet offers a precise 0.174" thickness and a dimensional footprint of 15" x 17". Fabricated from high-quality carbon steel, it exhibits excellent tensile strength, yield strength, and machinability, making it ideal for fabricating critical hydraulic manifold blocks, valve bodies, and structural support elements. Its inherent toughness and resistance to deformation under load ensure the integrity and performance of hydraulic assemblies in diverse industrial and mobile equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility and dimensions against design specifications. 2. Machine sheet to required component geometry using appropriate cutting and drilling tools. 3. Perform surface finishing and deburring as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect machining parameters leading to material stress or damage. | Consult material datasheets for recommended cutting speeds, feed rates, and coolant usage for carbon steel. |
| Inadequate surface preparation before assembly or coating. | Ensure all surfaces are clean, free of contaminants, and properly prepared for subsequent processes to prevent premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Valve Body Machining, Hydraulic Cylinder Components, Pressure Vessel End Caps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||