This high-performance Nylon stock sheet, precisely 0.172 inches thick, offers exceptional durability and resilience. Ideal for critical hydraulic system components requiring robust material properties.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.172" |
| Length | 40" |
| Width | 43" |
Manufactured under strict quality controls, this Nylon stock sheet measures 0.172" in thickness, with a standard length of 40" and a width of 43". Composed of high-grade Nylon, it exhibits excellent tensile strength, high abrasion resistance, and superior impact toughness, making it an ideal material for seals, wear pads, and structural components in demanding hydraulic environments. Its inherent lubricity reduces friction and wear, contributing to extended component lifespan and system efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Accurately cut the Nylon sheet to the required dimensions using appropriate tooling. 3. Securely fasten the component, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly shaped components. | Precisely measure and cut the Nylon stock sheet to match the exact specifications of the hydraulic system's requirements. |
| Inadequate surface preparation of mating parts. | Thoroughly clean all mating surfaces to remove any contaminants that could compromise seal integrity or cause premature wear. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic seals and O-rings, Wear pads and guide rings, Bushings and bearings in hydraulic cylinders.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||