This premium brass stock sheet is engineered for demanding pressure and temperature control applications. Its robust construction ensures reliability and longevity in critical industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.171" |
| Length | 37" |
| Width | 46" |
A high-performance industrial component, this brass stock sheet is precisely manufactured to a thickness of 0.171 inches, with generous dimensions of 37 inches in length and 46 inches in width. Composed of high-grade brass, it exhibits excellent thermal conductivity, inherent corrosion resistance, and good machinability, making it suitable for fabrication into a wide array of components. Its material properties facilitate effective heat transfer and a reliable seal in moderate to high-pressure systems, ensuring consistent performance under varying thermal loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Precisely cut the brass sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component using industry-standard methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or imprecise edges. | Employ sharp, high-quality cutting tools specifically designed for brass to ensure clean, accurate cuts. |
| Inadequate surface preparation before installation, compromising seal integrity. | Thoroughly clean and degrease all mating surfaces to guarantee a secure and leak-free seal. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchanger Components, Pressure Vessel Fabrication, Valve Body Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||