This robust brass stock sheet offers superior durability and corrosion resistance. Engineered for demanding industrial environments, it's an essential component for custom fabrication and critical system repairs.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.171" |
| Length | 20" |
| Width | 16" |
A high-performance industrial component, this brass stock sheet is precision manufactured to exacting standards. With a nominal thickness of 0.171 inches, a length of 20 inches, and a width of 16 inches, it provides substantial material for robust applications. The inherent properties of brass, including its excellent machinability, weldability, and resistance to dezincification, make it ideal for environments where longevity and reliability are paramount. Its non-sparking nature further expands its utility in potentially hazardous settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly to ensure proper adhesion or welding. 2. Measure and cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using approved fasteners or welding techniques based on the application's design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to jagged edges or material deformation. | Employ carbide-tipped blades or abrasive cutting wheels designed for metal to achieve clean, precise cuts. |
| Inadequate surface preparation before joining, compromising the integrity of the connection. | Scrape or wire brush surfaces to remove any oxidation, dirt, or grease prior to welding or bonding. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom plumbing fittings and repairs, Industrial fabrication and prototyping, Electrical grounding components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||