Engineered for demanding hydraulic applications, this 0.157" thick carbon steel stock sheet offers exceptional strength and durability. Its precise dimensions ensure consistent performance in critical hydraulic component manufacturing.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.157" |
| Length | 35" |
| Width | 43" |
Specified by design engineers worldwide, this 0.157" thick carbon steel stock sheet (35" x 43") is manufactured to exacting tolerances. Its high tensile strength and yield strength make it ideal for fabricating robust hydraulic cylinders, reservoirs, and manifold blocks. The material's inherent toughness ensures resistance to pressure surges and wear, critical for long-term operational reliability in diverse hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against design specifications. 2. Cut and machine the carbon steel sheet according to precise fabrication drawings. 3. Perform necessary surface treatments or coatings as required by the hydraulic system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using material with insufficient thickness for high-pressure hydraulic applications. | Always confirm the required material thickness based on pressure ratings and safety factors specified in the hydraulic system design. |
| Inadequate post-fabrication cleaning, leading to contamination in hydraulic circuits. | Thoroughly clean all machined surfaces and edges to remove any debris, burrs, or machining fluids before assembly. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Cylinder Barrels, Hydraulic Reservoir Fabrication, Manifold Block Construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||