This robust carbon steel stock sheet, precisely manufactured to 0.153" thickness, 21" length, and 13" width, is engineered for superior performance in demanding pulling and lifting operations.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.153" |
| Length | 21" |
| Width | 13" |
Built to exacting engineering tolerances, this 0.153-inch thick carbon steel stock sheet provides exceptional tensile strength and rigidity for critical pulling and lifting applications. The material's inherent durability and resistance to deformation ensure reliable performance under substantial load. Its 21-inch length and 13-inch width offer a versatile surface area suitable for fabricating custom lifting eyes, reinforcement plates, or structural components within heavy machinery. Compliance with industry standards for carbon steel plate ensures consistent material properties and predictable behavior in harsh environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Align the stock sheet with the intended mounting points. 3. Securely fasten the stock sheet using appropriate hardware as per application design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for mounting. | Always utilize fasteners with adequate shear and tensile strength ratings that are appropriate for the anticipated loads. |
| Improper material handling leading to deformation. | Handle the stock sheet with care, avoiding sharp impacts or excessive bending during transport and installation. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of custom lifting lugs and brackets, Reinforcement plates for structural components, Base plates for winches and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||