This high-quality carbon steel stock sheet is engineered for the rigorous demands of hydraulic systems. Its robust construction ensures reliable performance in critical fluid power applications, offering exceptional durability and structural integrity.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.145" |
| Length | 19" |
| Width | 24" |
Built to exacting engineering tolerances, this 0.145" thick carbon steel sheet measures 19 inches in length and 24 inches in width. Fabricated from high-strength carbon steel, it exhibits excellent tensile strength and yield strength, making it ideal for fabricating hydraulic components such as manifold blocks, accumulator shells, and structural supports. The material's inherent rigidity and resistance to deformation ensure optimal sealing and pressure containment within hydraulic circuits, contributing to system efficiency and safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Ensure proper cutting and machining techniques are employed to maintain material integrity and dimensional accuracy. 3. Prepare edges for welding or assembly according to engineering drawings and industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel without considering pressure ratings. | Always select carbon steel grades specifically suited for hydraulic pressure requirements and perform material strength calculations. |
| Inadequate edge preparation leading to compromised welds or seals. | Thoroughly deburr and clean all edges to ensure optimal weld penetration and leak-free sealing. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Accumulator Shell Construction, Hydraulic System Structural Supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||