This robust brass stock sheet provides superior performance in demanding pressure and temperature control environments. Its inherent corrosion resistance and excellent machinability make it ideal for fabricating critical components and systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.139" |
| Length | 35" |
| Width | 13" |
Built to exacting engineering tolerances, this brass stock sheet offers a thickness of 0.139 inches, a length of 35 inches, and a width of 13 inches. Composed of a high-quality brass alloy, it exhibits excellent thermal conductivity and electrical conductivity, making it suitable for heat exchangers, pressure vessels, and fluid control manifolds. The material's inherent ductility and malleability allow for intricate shaping and forming without compromising structural integrity, ensuring reliable operation under varying thermal and pressure cycles.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of contaminants. 2. Precisely cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Fabricate or form the component according to design specifications, paying close attention to joint integrity and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can lead to burring or material deformation. | Employ sharp, high-quality cutting tools specifically designed for brass or sheet metal fabrication to ensure clean, precise cuts. |
| Inadequate surface preparation before joining or forming, leading to compromised seals or structural weaknesses. | Thoroughly clean and degrease the brass surface before any welding, brazing, or forming operations to ensure optimal adhesion and integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure vessel fabrication, Heat exchanger components, Fluid control system manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||