Engineered from robust polycarbonate, this 0.125-inch thick sheet offers exceptional impact resistance and clarity, making it ideal for high-stress pulling and lifting components where durability and visibility are paramount.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.125" |
| Length | 33" |
| Width | 24" |
Specified by design engineers worldwide, this 0.125" thick polycarbonate stock sheet measures 33" in length and 24" in width. Its superior impact strength, exceeding that of glass and acrylic, makes it a preferred material for safety shields, machine guards, and wear surfaces in pulling and lifting mechanisms. The material's excellent optical clarity ensures unimpeded visual inspection of operational components, while its inherent toughness resists fracturing under heavy load or sudden impact, contributing to extended equipment lifespan and operational safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Align the polycarbonate sheet precisely with the intended mounting points. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening which can cause stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using fasteners that are too short or too long, compromising structural integrity. | Utilize fasteners of the appropriate length as specified by the application's load requirements and mounting substrate. |
| Drilling holes too close to the edge, increasing the risk of delamination or fracture. | Maintain adequate edge distance when drilling holes, typically a minimum of 1.5 times the hole diameter. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards for lifting equipment, Protective shields for automated pulling systems, Wear surfaces in conveyor and material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||