This high-quality carbon steel stock sheet is engineered for demanding hydraulic systems. Its robust construction and precise dimensions ensure reliable performance and a secure fit in critical components.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.123" |
| Length | 35" |
| Width | 44" |
Precision-manufactured to tight tolerances, this carbon steel stock sheet offers exceptional flatness and dimensional accuracy. Measuring 0.123 inches in thickness, 35 inches in length, and 44 inches in width, it is ideal for fabricating hydraulic manifolds, pump housings, and valve bodies. The inherent strength and workability of carbon steel make it a cost-effective and durable material for high-pressure hydraulic applications. Its consistent surface finish facilitates efficient machining and sealing, crucial for leak-free operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet meets the required dimensions and quality standards for the specific hydraulic component. 2. Prepare the mating surfaces for optimal sealing and structural integrity. 3. Fabricate and integrate the sheet into the hydraulic system according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a sheet with inconsistent thickness | Verify the thickness of the sheet across its entire surface before fabrication. |
| Inadequate surface preparation | Thoroughly clean and deburr all edges and surfaces to ensure proper sealing and prevent debris contamination. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Pump and Valve Body Construction, Hydraulic Cylinder Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||