This premium brass stock sheet, meticulously manufactured to exacting standards, is the preferred material for critical hydraulic system components. Its superior properties ensure reliability and longevity in demanding operational environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.123" |
| Length | 36" |
| Width | 37" |
Specified by design engineers worldwide, this 0.123" thick brass stock sheet offers exceptional performance in hydraulic systems. Composed of a high-copper alloy, it exhibits excellent machinability, superior corrosion resistance against hydraulic fluids, and optimal thermal conductivity. The sheet's precise dimensions of 36" in length and 37" in width provide ample material for fabrication of custom fittings, valve bodies, and manifold blocks, ensuring leak-free operation and extended service life under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any debris or contaminants. 2. Ensure proper alignment of the brass sheet with the intended hydraulic component. 3. Securely fasten the brass sheet using appropriate hardware and torque specifications as per hydraulic system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that can cause galvanic corrosion. | Utilize fasteners made from materials like stainless steel or brass, as specified by the hydraulic system's design. |
| Insufficient surface preparation leading to leaks. | Thoroughly degrease and deburr all edges and surfaces of the brass sheet before assembly. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Fittings and Connectors, Valve Bodies and Spools, Hydraulic Manifold Blocks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||