This high-performance Nylon stock sheet, measuring 0.113" thick, 37" in length, and 44" in width, is specifically engineered for demanding Heating & Cooling applications requiring robust material properties.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.113" |
| Length | 37" |
| Width | 44" |
Built to exacting engineering tolerances, this 0.113" thick Nylon stock sheet offers exceptional dimensional stability and mechanical strength. Its inherent dielectric properties and resistance to thermal degradation make it ideal for insulation, structural support, and component fabrication within HVAC systems. The material's low friction coefficient and good wear resistance ensure longevity in dynamic operational environments. The generous 37" x 44" dimensions provide ample material for custom cutting and fitting in complex installations, ensuring a precise and reliable system build.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 2. Ensure the mating surfaces are clean and free of debris. 3. Secure the installed component using suitable fasteners, ensuring even pressure distribution to avoid material stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for plastic, leading to rough edges or material chipping. | Utilize carbide-tipped blades or specialized plastic cutting tools for clean, precise edges. |
| Over-tightening fasteners, causing excessive stress and potential cracking of the Nylon sheet. | Employ washers and torque wrenches to apply even pressure and prevent over-compression. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC Duct Liner Insulation, Electrical Insulators in Control Panels, Structural Supports for Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||