Engineered for robust performance in critical pressure and temperature control systems. This 0.103" thick carbon steel sheet offers exceptional strength and reliability for demanding industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.103" |
| Length | 18" |
| Width | 28" |
Specified by design engineers worldwide, this 0.103-inch thick carbon steel stock sheet measures 18 inches by 28 inches. Manufactured to ASTM A36 or equivalent standards, it exhibits a minimum tensile strength of 58 ksi and a yield strength of 36 ksi, ensuring superior structural integrity under high pressure and thermal cycling. Its inherent ductility and weldability facilitate fabrication for custom solutions in demanding applications where consistent performance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of contaminants. 2. Precisely cut to required dimensions using appropriate cutting tools. 3. Fabricate and integrate into system according to detailed engineering schematics.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to material deformation. | Employ tools specifically designed for cutting steel sheets to maintain dimensional accuracy and material integrity. |
| Inadequate surface preparation before welding or assembly. | Thoroughly clean all surfaces to remove rust, oil, and debris to ensure strong, defect-free joints. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||