High-grade brass stock sheet, precisely fabricated to 0.100" thickness. This 32" x 33" sheet offers exceptional machinability and durability for demanding industrial hardware and fabrication projects.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.100" |
| Length | 32" |
| Width | 33" |
Manufactured under strict quality controls, this brass stock sheet measures 0.100 inches (2.54 mm) in thickness, with a nominal length of 32 inches (812.8 mm) and a width of 33 inches (838.2 mm). Composed of a copper-zinc alloy (typically UNS C26000 or similar), it exhibits excellent corrosion resistance, good formability, and superior electrical conductivity. Its inherent strength and solderability make it suitable for a wide range of mechanical and decorative applications where reliability and aesthetic appeal are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and well-lit. 2. Accurately measure and mark the brass sheet according to design specifications. 3. Utilize appropriate cutting tools (e.g., shear, laser cutter) for precise material removal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to jagged edges and material deformation. | Employ sharp, high-quality cutting blades or bits designed for metal fabrication to ensure clean, precise cuts. |
| Applying excessive force during bending or forming, causing stress fractures or unwanted distortion. | Utilize proper bending radii and techniques, potentially employing annealing if significant forming is required, to prevent material failure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical connectors and terminals, Decorative trim and architectural elements, Custom hardware components and brackets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||