This high-quality carbon steel stock sheet, measuring 0.095" thick, 16" wide, and 40" long, is engineered for demanding hydraulic system components. Its robust material properties ensure exceptional durability and performance.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.095" |
| Length | 16" |
| Width | 40" |
Manufactured under strict quality controls, this carbon steel stock sheet offers a precise thickness of 0.095 inches, a length of 16 inches, and a width of 40 inches. The material's inherent tensile strength and yield strength make it ideally suited for fabricating components within high-pressure hydraulic systems, such as manifolds, mounting plates, and structural supports. Its formability and weldability allow for complex designs and reliable assembly, ensuring structural integrity under significant operational loads. Compliance with relevant industry standards is maintained throughout the production process.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and deburr all edges of the carbon steel sheet prior to fabrication. 2. Precisely cut the sheet to the required dimensions for the intended hydraulic component. 3. Weld or fasten according to engineering drawings and specific application requirements, ensuring proper joint integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate edge preparation leading to stress risers. | Thoroughly deburr and smooth all cut edges to prevent premature material failure. |
| Using incorrect welding procedures for carbon steel in high-pressure environments. | Consult welding specifications and use appropriate filler materials and techniques for the intended pressure rating. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Hydraulic System Mounting Plates, Structural Supports for Hydraulic Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||