This robust Nylon stock sheet, measuring 0.094" x 19" x 25", is engineered for demanding pressure and temperature control applications. Its superior material properties ensure longevity and reliable performance in critical industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.094" |
| Length | 25" |
| Width | 19" |
Engineered for reliability and performance, this 0.094" thick Nylon stock sheet offers exceptional dimensional stability under varying thermal loads and pressures. The inherent toughness and abrasion resistance of Nylon make it ideal for components subjected to friction and mechanical stress. Its excellent dielectric strength further enhances its utility in electrical insulation applications. With dimensions of 19" width and 25" length, this sheet provides ample material for fabrication of custom parts, seals, gaskets, and wear pads within pressure and temperature control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools (e.g., band saw, CNC router). 2. Prepare mating surfaces to ensure a clean and flat interface for optimal sealing or wear. 3. Secure the fabricated Nylon component using appropriate fasteners or adhesives, ensuring proper torque or bonding strength.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper cooling, leading to melting or warping of the Nylon. | Employ cutting tools with adequate coolant systems or use slow, controlled cutting speeds to prevent excessive heat buildup. |
| Over-tightening fasteners, which can cause stress cracking or deformation of the Nylon component. | Utilize torque-limiting tools and follow recommended fastening specifications for Nylon to avoid over-compression. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pressure vessel liners, High-temperature seals and gaskets, Wear pads and bushings in control valves, Insulating components in thermal management systems, Protective covers for pressure sensors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||