This high-strength carbon steel stock sheet is engineered for robust hydraulic system components. Its precise dimensions and material integrity ensure reliable performance under pressure and demanding operational conditions.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.091" |
| Length | 26" |
| Width | 36" |
Manufactured under strict quality controls, this 0.091" thick carbon steel sheet offers exceptional tensile strength and formability, crucial for hydraulic manifold fabrication and structural support in fluid power systems. The 26" x 36" dimensions provide ample material for customization and integration into various hydraulic circuit designs. Its inherent durability resists wear and deformation, ensuring longevity in high-pressure environments. Certified for industrial use, this material meets stringent performance requirements for hydraulic applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against design specifications. 2. Prepare surfaces for cutting, bending, or welding according to hydraulic system requirements. 3. Install fabricated components adhering to all relevant safety and engineering standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly specified steel for hydraulic applications, leading to premature failure. | Always confirm material grade and thickness meet or exceed the design pressure and stress requirements for hydraulic components. |
| Improper surface preparation before fabrication, causing welding defects or compromised component integrity. | Thoroughly clean and degrease the steel surface to remove any contaminants that could interfere with welding or bonding. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Hydraulic Reservoir Fabrication, Structural Supports for Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||