This high-quality carbon steel stock sheet, measuring 0.090" thick by 14" wide and 23" long, is engineered for robust performance in hydraulic systems. Its substantial gauge and carbon steel composition ensure superior strength and longevity.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.090" |
| Length | 14" |
| Width | 23" |
Built to exacting engineering tolerances, this 0.090" thick carbon steel sheet offers a precise 14" x 23" dimension, crucial for seamless integration into hydraulic manifold blocks, mounting plates, and custom component fabrication. The inherent strength and formability of carbon steel provide excellent structural integrity and resistance to the high pressures and operational stresses typical in hydraulic circuits. Its consistent thickness ensures predictable fluid dynamics and reliable sealing, minimizing leakage risks.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface condition prior to cutting. 2. Utilize appropriate cutting and machining tools suitable for carbon steel. 3. Deburr all cut edges thoroughly to prevent stress concentration and potential failure points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate edge preparation post-cutting. | Always deburr cut edges meticulously to remove sharp points and prevent stress risers that could lead to premature failure in high-pressure hydraulic systems. |
| Using standard carbon steel without considering specific hydraulic demands. | Ensure the carbon steel grade is suitable for the intended hydraulic environment, considering factors like potential corrosion and operating temperatures. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic manifold block fabrication, Custom hydraulic component prototyping, Mounting plates for hydraulic pumps and valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||