Engineered for robust hydraulic systems, this 0.090" carbon steel stock sheet offers superior strength and durability. Precisely manufactured for reliable performance in demanding fluid power applications.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.090" |
| Length | 40" |
| Width | 19" |
A high-performance industrial component, this 0.090" thick carbon steel stock sheet measures 40" in length and 19" in width, providing ample material for custom hydraulic manifold fabrication and structural support components. Its carbon steel composition offers excellent tensile strength, weldability, and resistance to moderate pressures commonly encountered in hydraulic circuits. The precise dimensions ensure consistent fit and function, minimizing machining waste and facilitating efficient assembly in demanding fluid power applications. This material is ideal for applications requiring a balance of cost-effectiveness and reliable mechanical properties.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of contaminants. 2. Precisely cut to required dimensions using appropriate tooling. 3. Weld or fasten according to system design specifications and applicable codes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs or deformation. | Utilize sharp, appropriate metal-cutting blades (e.g., abrasive or carbide-tipped) for a clean and precise cut, minimizing post-processing. |
| Inadequate surface preparation before welding or fastening. | Thoroughly degrease and remove any mill scale or rust from the cutting area to ensure optimal weld penetration and structural integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Hydraulic System Structural Components, Custom Reservoir Construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||