This high-quality carbon steel stock sheet is precision-manufactured for demanding hydraulic systems. Its robust 0.086" thickness and generous 24"x34" dimensions offer excellent formability and structural integrity for custom components.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.086" |
| Length | 24" |
| Width | 34" |
Built to exacting engineering tolerances, this 0.086" thick carbon steel stock sheet provides a reliable foundation for hydraulic component fabrication. The material's inherent strength and ductility, characteristic of carbon steel, allow for precise bending, cutting, and welding, crucial for maintaining system integrity under pressure. With dimensions of 24"x34", it offers ample material for creating custom manifolds, mounting brackets, reservoir components, and other essential parts within hydraulic circuits, ensuring consistent performance and longevity. Surface finish is suitable for subsequent machining or protective coatings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the carbon steel sheet according to design specifications. 2. Employ appropriate cutting methods (e.g., plasma cutting, laser cutting, or abrasive waterjet) to achieve clean, precise edges. 3. Prepare edges for joining through deburring and cleaning; if welding, ensure proper joint preparation and shielding gas selection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inaccurate cutting leading to dimensional drift and fitment issues. | Utilize precision cutting equipment and verify dimensions against design tolerances before and after cutting. |
| Improper weld preparation causing porosity or weak joints. | Thoroughly clean and bevel edges, use appropriate welding consumables, and maintain correct heat input and shielding gas for carbon steel. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom Hydraulic Manifold Fabrication, Hydraulic Reservoir Construction, Mounting Brackets and Support Structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||