This precision-engineered brass stock sheet offers superior corrosion resistance and excellent machinability, making it ideal for fabricating custom hydraulic components. Its specific dimensions ensure efficient material utilization in hydraulic system construction.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.086" |
| Length | 42" |
| Width | 18" |
Precision-manufactured to tight tolerances, this 0.086-inch thick brass stock sheet measures 42 inches in length and 18 inches in width. Composed of a high-copper alloy, it exhibits excellent thermal conductivity, good strength, and superior resistance to many hydraulic fluids and environmental factors. This material is specifically chosen for its non-sparking properties and ease of fabrication, making it suitable for a wide range of demanding hydraulic applications where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before any cutting or machining. 2. Accurately mark and cut to required dimensions using appropriate tooling for brass. 3. Smooth all cut edges to prevent stress concentrations and ensure proper component fitment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper lubrication, leading to tool wear and poor cut quality. | Employ cutting tools specifically designed for brass or copper alloys, utilizing appropriate cutting fluids to maintain sharpness and achieve clean cuts. |
| Overheating the brass during machining, which can alter its metallurgical properties and reduce its intended performance. | Utilize moderate cutting speeds and feed rates, with adequate coolant, to dissipate heat effectively and preserve the material's integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic manifold fabrication, Custom valve bodies, Hydraulic fitting components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||