High-quality carbon steel stock sheet, precisely cut to 0.067" thickness, 47" length, and 34" width. Ideal for robust fabrication and repair in demanding heating and cooling applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.067" |
| Length | 47" |
| Width | 34" |
Manufactured under strict quality controls, this carbon steel stock sheet offers exceptional durability and formability. With a thickness of 0.067 inches, it provides sufficient rigidity for structural integrity in HVAC ductwork and plenums. The 47-inch length and 34-inch width offer ample material for custom fabrication, ensuring efficient use and minimal waste. Its inherent strength and resistance to moderate temperatures make it a reliable choice for air handling systems, heat exchangers, and general sheet metal work within the heating and cooling sector. The material's weldability and machinability further enhance its utility for complex designs and repairs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and cut the carbon steel sheet to the required dimensions for the intended application. 2. Prepare edges for joining (e.g., deburr, clean, or bevel) as per fabrication standards. 3. Secure and join the sheet using appropriate welding, riveting, or fastening techniques for HVAC systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and uneven edges. | Employ sharp, designated metal cutting tools (e.g., shears, plasma cutter) and always deburr edges thoroughly after cutting. |
| Inadequate surface preparation before welding or fastening, causing weak joints. | Ensure all surfaces are clean, free of oil, grease, paint, and rust before any joining process. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: HVAC Ductwork Fabrication, Plenum Construction, Heat Exchanger Casing, General Sheet Metal Repairs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||