Engineered for demanding environments, this 0.064" thick polycarbonate sheet offers exceptional impact strength and clarity. Ideal for protective barriers and enclosures in plumbing and janitorial settings.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.064" |
| Length | 48" |
| Width | 46" |
Trusted by engineers across multiple sectors, this 0.064" thick polycarbonate sheet is manufactured to exacting standards. Measuring 48" in length and 46" in width, its superior impact resistance (up to 200 times that of glass) ensures longevity in high-traffic areas. The material's excellent clarity, UV resistance, and broad chemical compatibility make it suitable for a range of protective applications, from machine guarding to splash shields in industrial hygiene environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Mark and pre-drill mounting holes in the polycarbonate sheet, accounting for thermal expansion (approximately 1/8" per foot). 3. Secure the sheet using appropriately sized fasteners with neoprene washers to prevent stress concentration and allow for expansion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge without consideration for expansion. | Always allow for thermal expansion by drilling oversized holes and utilizing appropriate fasteners with washers. |
| Using abrasive cleaning agents that can scratch the polycarbonate surface. | Clean with a mild soap and water solution, followed by a rinse and drying with a soft, lint-free cloth. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective machine guarding, Splash shields and barriers, Vandal-resistant glazing, Enclosures for equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||