This robust carbon steel stock sheet, with precise dimensions of 0.054" thickness, 23" width, and 37" length, is engineered for demanding plumbing and janitorial environments. Its superior strength and formability make it ideal for custom fabrication.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.054" |
| Length | 23" |
| Width | 37" |
Specified by design engineers worldwide, this carbon steel stock sheet offers exceptional durability and workability. Measuring 0.054 inches in thickness, 23 inches in width, and 37 inches in length, it is manufactured from high-grade carbon steel, ensuring excellent tensile strength and resistance to deformation under stress. The material's inherent properties make it suitable for a wide array of fabrication tasks including custom brackets, support structures, protective coverings, and repair components within plumbing and janitorial systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely mark cutting lines on the carbon steel sheet according to project requirements. 2. Employ appropriate cutting tools (e.g., shears, plasma cutter) to achieve clean, accurate edges. 3. Deburr all cut edges thoroughly to remove sharp fragments and prevent potential injury.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, resulting in rough or uneven edges. | Utilize sharp, high-quality cutting tools designed for metal fabrication to ensure precise and clean cuts. |
| Failing to deburr cut edges, leaving sharp hazards. | Always use a deburring tool or file to smooth all cut edges before further handling or installation. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom bracket fabrication for pipe supports, Protective coverings for plumbing fixtures, Repair patches for tanks and conduits.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||