This 0.048-inch thick 304 stainless steel stock sheet offers superior corrosion resistance and formability. Precisely sized at 20" x 47", it's ideal for a wide range of demanding applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.048" |
| Length | 47" |
| Width | 20" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet exhibits a nominal thickness of 0.048 inches, a length of 47 inches, and a width of 20 inches. Composed of approximately 18% chromium and 8% nickel, 304 stainless steel provides excellent resistance to oxidation and general corrosion, making it suitable for environments ranging from food processing to chemical handling. Its inherent strength and ductility allow for precise fabrication techniques such as bending, welding, and stamping without compromising structural integrity. This material grade is widely recognized for its hygienic properties and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris before fabrication. 2. Utilize appropriate cutting tools designed for stainless steel to achieve precise dimensions. 3. Employ suitable welding or joining techniques, considering the material's composition to prevent sensitization and maintain corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper lubrication, leading to excessive heat and material damage. | Employ specialized stainless steel cutting tools with adequate cooling and lubrication to minimize heat buildup and ensure clean cuts. |
| Inadequate cleaning after welding, leaving behind flux or other residues that can initiate corrosion. | Thoroughly clean the welded area immediately after welding using appropriate stainless steel cleaning agents to remove all residual contaminants. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of tanks and vessels, Industrial shelving and work surfaces, Food processing equipment components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||